Allied Manufacturing (TIX)
Tix Solder 275 Degree Melt
|
125 Grains, 20 Sticks
Walthers Part # 118-1, p. 838 Walthers 2010 HO Scale Reference
A scale, $12.60, currently in stock at Walthers
Indium-based solder melt at 275° F (150° lower than lead-tin solders, with
a much higher wetting ability). Specific gravity is 8.6, while the bonding
holding strength is 4,000lbs PSI. Will never tarnish; contains no silver or
bismuth and will solder to platinum, golds, silver and numerous alloys.
Solid-state components can be soldered without using a heat sink. Repairs
to printed circuit boards are simple as the low melting point will not
damage the board. use with any Flux, rosin, chloride or acid.
Indium-based solder melt at 275° F (150° lower than lead-tin solders, with a
much higher wetting ability). Specific gravity is 8.6, while the bonding
holding strength is 4,000lbs PSI. Will never tarnish; contains no silver or
bismuth and will solder to platinum, golds, silver and numerous alloys.
Solid-state components can be soldered without using a heat sink. Repairs
to printed circuit boards are simple as the low melting point will not
damage the board. use with any Flux, rosin, chloride or acid.
|
| |
